Page 5 sur 6 PremièrePremière ... 3456 DernièreDernière
Résultats de 41 à 50 sur 52
  1. #41
    Membre enregistré Routard Avatar de darkjojo78
    Inscrit
    09/03/2015
    Localisation
    78 Yvelines
    Messages
    1 313
    Véhicule
    Peugeot 208 GTi Blanche Perle Nacrée
    Kilométrage
    84000
    Mentionné
    115 Post(s)
    Taggué
    Sujet(s)
    Citation Envoyé par Cronff Voir le message
    OK Merci :)
    la température d'huile est bien disponible sur nos 208 gti mais pour l'instant que avec la valise peugeot, faut juste maintenant savoir comment recupere l'info avec un elm327

    Cliquez sur l'image pour l'afficher en taille normale

Nom : bsi2010 208gti.PNG 
Affichages : 121 
Taille : 164.7 Ko 
ID : 15494
    Cliquez sur l'image pour l'afficher en taille normale

Nom : bsi2010 208 gti.PNG 
Affichages : 80 
Taille : 168.0 Ko 
ID : 15493
    Cliquez sur l'image pour l'afficher en taille normale

Nom : bsi2010 information moteur 208 gti.PNG 
Affichages : 84 
Taille : 145.9 Ko 
ID : 15455
    Dernière édition par darkjojo78; 29/09/2019 à 18:49

  2. #42
    Membre enregistré Membre Habitué
    Inscrit
    16/09/2015
    Localisation
    Italie
    Messages
    32
    Véhicule
    Peugeot 208 GTi BPS Rouge Rubis
    Mentionné
    6 Post(s)
    Taggué
    Sujet(s)
    Citation Envoyé par Cronff Voir le message
    Pseudo-déterrage: vous avez du nouveau sur cette fameuse sonde de température d'huile?
    Ou sur comment l'utiliser pour obtenir la température d'huile?

    :)
    The 208 GTi BPS (208ch euro6) does not have the oil temperature sensor.
    There are only the oil pressure sensor and oil level sensor.
    The oil temperature is only calculated by engine ECU and sent to the BSI through the CAN bus (inside the data packet with address 0x488 for the MEVD17.4.4 ECU)

    According to the MED17.4.2 Funktionsrahmen also this ecu and probably the MEVD17.4.2 has the oil temperature transmitted in the data package with address 0x488
    Dernière édition par mfc; 29/09/2019 à 21:16

  3. #43
    Membre enregistré Routard Avatar de darkjojo78
    Inscrit
    09/03/2015
    Localisation
    78 Yvelines
    Messages
    1 313
    Véhicule
    Peugeot 208 GTi Blanche Perle Nacrée
    Kilométrage
    84000
    Mentionné
    115 Post(s)
    Taggué
    Sujet(s)
    Citation Envoyé par mfc Voir le message
    The 208 GTi BPS (208ch euro6) does not have the oil temperature sensor.
    There are only the oil pressure sensor and oil level sensor.
    The oil temperature is only calculated by engine ECU and sent to the BSI through the CAN bus (inside the data packet with address 0x488 for the MEVD17.4.4 ECU)

    According to the MED17.4.2 Funktionsrahmen also this ecu and probably the MEVD17.4.2 has the oil temperature transmitted in the data package with address 0x488
    the oil level sensor is actually the oil temperature sensor that is used by the calculator to measure the level thanks to a mathematical formula

  4. #44
    Membre enregistré Membre Habitué
    Inscrit
    16/09/2015
    Localisation
    Italie
    Messages
    32
    Véhicule
    Peugeot 208 GTi BPS Rouge Rubis
    Mentionné
    6 Post(s)
    Taggué
    Sujet(s)
    Citation Envoyé par darkjojo78 Voir le message
    the oil level sensor is actually the oil temperature sensor that is used by the calculator to measure the level thanks to a mathematical formula
    You are right in saying that the oil level sensor is also the oil temperature sensor; according to the official PSA documentation for the EP6FDTX engine, the oil level sensor (P/N:9806246080) has 3 pins:
    1: oil level
    2: oil temperature
    3: ground

    but, unfortunately, the pin 2 is not connected to anything...

  5. #45
    Membre enregistré Routard Avatar de darkjojo78
    Inscrit
    09/03/2015
    Localisation
    78 Yvelines
    Messages
    1 313
    Véhicule
    Peugeot 208 GTi Blanche Perle Nacrée
    Kilométrage
    84000
    Mentionné
    115 Post(s)
    Taggué
    Sujet(s)
    Citation Envoyé par mfc Voir le message
    You are right in saying that the oil level sensor is also the oil temperature sensor; according to the official PSA documentation for the EP6FDTX engine, the oil level sensor (P/N:9806246080) has 3 pins:
    1: oil level
    2: oil temperature
    3: ground

    but, unfortunately, the pin 2 is not connected to anything...
    it's a resistance probe

    Cliquez sur l'image pour l'afficher en taille normale

Nom : sonde d'huile 208 gti.PNG 
Affichages : 99 
Taille : 160.9 Ko 
ID : 15496

  6. #46
    Membre enregistré Membre Habitué
    Inscrit
    16/09/2015
    Localisation
    Italie
    Messages
    32
    Véhicule
    Peugeot 208 GTi BPS Rouge Rubis
    Mentionné
    6 Post(s)
    Taggué
    Sujet(s)
    yes is a resistance probe, but you note that:
    "The engine oil level sensor is only active when the vehicle contact is switched on and is deactivated when the engine is started."
    the resistance variation caused by the temperature is much larger on the "temperature" side than on the "level" side of the probe.
    Images jointes Images jointes   

  7. #47
    Membre enregistré Membre Habitué
    Inscrit
    16/09/2015
    Localisation
    Italie
    Messages
    32
    Véhicule
    Peugeot 208 GTi BPS Rouge Rubis
    Mentionné
    6 Post(s)
    Taggué
    Sujet(s)
    thi is the electrical connection of the probe to the ecu MEVD17.4.4
    Images jointes Images jointes  

  8. #48
    Membre enregistré Routard Avatar de darkjojo78
    Inscrit
    09/03/2015
    Localisation
    78 Yvelines
    Messages
    1 313
    Véhicule
    Peugeot 208 GTi Blanche Perle Nacrée
    Kilométrage
    84000
    Mentionné
    115 Post(s)
    Taggué
    Sujet(s)
    Citation Envoyé par mfc Voir le message
    thi is the electrical connection of the probe to the ecu MEVD17.4.4

    with diagbox we can display an oil temperature value. I guess the calculator will retrieve this information on the oil level sensor to display this value.

  9. #49
    Membre enregistré Membre Habitué
    Inscrit
    16/09/2015
    Localisation
    Italie
    Messages
    32
    Véhicule
    Peugeot 208 GTi BPS Rouge Rubis
    Mentionné
    6 Post(s)
    Taggué
    Sujet(s)
    for completeness of information.
    the message with 0x488 address is sent 10 times per second and is composed by 8 byte of data with the following meaning (at least for the MEVD17.4.4 ECU):
    Byte 1: water temperature: you need to add +40°C to get the real temperature in °C
    Byte 2: volumetric fuel consumption: you need to multiply the value by 80 to get the volume in mm^3
    Byte 3: requested engine idle: you need to multiply the value by 8 to get the RPM
    Byte 6: oil temperature: you need to add +40°C to get the real temperature in °C
    Byte 8: boost air temperature: you need to add +40°C to get the real temperature in °C

  10. #50
    Membre enregistré Routard Avatar de darkjojo78
    Inscrit
    09/03/2015
    Localisation
    78 Yvelines
    Messages
    1 313
    Véhicule
    Peugeot 208 GTi Blanche Perle Nacrée
    Kilométrage
    84000
    Mentionné
    115 Post(s)
    Taggué
    Sujet(s)
    il y a peut être des chance d'avoir des info de diagbox sur torque, j'ai mis les info dans le sujet diagbox telemetry https://www.208gti.fr/showthread.php...elemetry/page3

Page 5 sur 6 PremièrePremière ... 3456 DernièreDernière

Liens sociaux

Règles des messages

  • Vous ne pouvez pas créer de sujets
  • Vous ne pouvez pas répondre aux sujets
  • Vous ne pouvez pas importer de fichiers joints
  • Vous ne pouvez pas éditer vos messages
  •  
  • Les BB codes sont Activés
  • Les Smileys sont Activés
  • Le BB code [IMG] est Activé
  • Le code [VIDEO] est Activé
  • Le code HTML est Désactivé
A Propos de nous
Forum 208 GTi : Le premier site sur la Peugeot 208 GTi.
Ce site est indépendant de la société Automobiles Peugeot, dépositaire de la marque Peugeot.
Le Forum sur les réseaux sociaux